The CopperCube collects trend log data by default on a 4-hour schedule. Optimizing Data Collection CopperCube Trendlog Management: Press the power button once, and wait.
#Coat3d to coppercube software#
This can cause software problems as processes don’t have time to terminate properly. Hold down the power button for 3 seconds will do a forced immediate shutdown.The following hardware resets are not recommended, but possible: Use the Restart and Shut Down buttons on the Basic Settings page.If necessary, the best way to restart or shutdown the CopperCube is through the GUI: We generally do not recommend restarting or shutting down the CopperCube. Please note that unplugging the CopperCube is never recommended and could be very harmful to the software. Print and use the onboarding forms available on the CopperCube support website before setting up the CopperCube.ĬopperCube restart and shut down procedures.Be aware of the load the cubes will place on the site’s (BACnet) network and its BBMD device(s). If not, then pre-determine how many CopperCubes are required, and how the site is to be divided between the CopperCubes to balance the load. Ensure the data volumes fit within the CopperCube limits.Know which devices range map to which buildings. Get a good feel for the number of controllers, trend logs, and BACnet objects on the entire site, and within each of the buildings and device ranges. Get familiar with the site before installing the CopperCube.These recommendations are based on years of experience with BACnet communications, Delta Controls devices, and data analytics. We offer the following recommendations to help your Coppercube perform well. Troubleshooting tips for sending data from the CopperCube to Kaizen are also included in this KbA. This KbA offers general usage guidelines for the CopperCube and reviews the best practices for your CopperCube configurations to optimize data collection and get the best performance from your CopperCube.
0 kommentar(er)
